|
|
| Metallurgical Service PricingMetallurgical Services
| Test |
Price
Each |
| Case Depth (Visual) |
$40.00 |
| Case Depth (Microhardness) 1 |
$40.00
+$2.00 per indentation |
| Coating Weight |
$40.00 |
| Exfoliation (aluminum) |
$40.00 |
| Grain Flow (macro or micro) 1 |
$30.00 |
| Grain size (visual comparison method ) 1 |
$40.00 |
| Inclusion rating (visual comparison method) 1 |
$40.00 |
| Intergranular corrosion test 1 |
$40.00 |
| Macro Sample Preparation and examination |
$40.00 minimum |
| Microstructural examination 1 |
$40.00 minimum |
| Microhardness (Knoop) 1 |
$40.00
+$2.00 per indentation |
| Macrohardness (Vickers) 1 |
$30.00
+$8.00 per indentation |
| Mount, Polish, Etch (specimen preparation) |
$50.00 |
| Photomicrograph, photomacrograph |
$20.00 |
| Extra print |
$5.00 |
| Plating/coating thickness 1 |
$40.00 |
| Density |
$50.00 |
| Electroless nickel plate (where required for micro
edge retention) |
$25.00 |
| Sectioning |
$60.00 per hour |
| Failure analysis/metallurgical reports 2 |
Price Upon Application |
| Scanning electron microscopy |
$200.00/hr Minimum 1/2 hr |
Notes
(1) Mount, polish, etch required
(2) Conducting various tests, using investigative procedures,
conducting metallurgical investigations, evaluating data,
analysis, consultation, examinations, research, reverse
engineering, measurements, preparing written text, report
preparation, etx. May be necessary processes and may be
included in creating a metallurgical report or failure analysis
reports. These procedures are billed at a rate of 80.00
per hour.
|
 |
© 2002-2010 Broomfield Designers and Colorado Metallurgical Services