| Test |
Price
Each |
| Flaring/Flattening (Tubing) |
$20.00 |
| Bend (Includes Visual Exam) |
$20.00 |
| Fillet Bend Sheet to .125" |
$15.00 |
| Plate over .125" Compression |
$25.00 |
| Peel |
$25.00 |
| Nick Break |
$20.00 |
| Hardness (Brinnell, Rockwell, Superficial) |
$15.00 |
| Hardness (Shore A or D) |
$25.00 |
| Hardness Traverse |
$20.00
+$5.00 per additional Indent |
| Sample Preparation2 |
Call for Quote |
Charpy Impact 1
(Machining, test, magnetic materials) |
| To 0°F |
$105.00 |
| To -90°F |
$125.00 |
| To -320°F |
$150.00 |
|
Charpy Impact 1
(Machining, tests non-magnetic materials) |
| To 0°F |
$135.00 |
| To -90°F |
$165.00 |
| To -320°F |
$230.00 |
|
Charpy Impact
(Pre-machined samples submitted by customer) |
| To 0°F |
$15.00 |
| To -90°F |
$25.00 |
| To -320°F |
$35.00 |
|
| Tensile Test Per ASTM E-8 1,2 |
| To 55K |
$15.00 |
| To 110K |
$25.00 |
| To 150K |
$30.00 |
|
| Tensile (subsize)1,2 |
$30.00 |
| Tensile (Premachined samples submitted by customer) |
$20.00 |
| Tensile, Tubing, Or wire |
$20.00 |
| Tensile, Reduced Temp. to -110°F |
$60.00 |
| Proof Loads |
$25.00
+$5.00 each |
| Shear (Double or Single - Does not include test
fixture, if required) |
$25.00 setup
+$10.00 each |
| In-Lab services, technician, and equipment |
$80.00/hr |
| Outside Lab Service |
$60.00/hr
+ travel expenses |
| Fastener/Bolt Testing (includes sectioning, machining
of test sample , and tensile test) |
To 1 inch diameter $20.00 |
| Fastener/Bolt Testing (includes sectioning, machining
of test sample , and tensile test) |
To 2 inch diameter $60.00 |
| Fastener/Bolt Testing (includes sectioning, machining
of test sample , and tensile test) |
To 3 inch diameter $90.00 |
| Wedge Test, Bolts, and Fasteners |
1 inch dia. Or less $25.00 |
© 2002-2010 Broomfield Designers and Colorado Metallurgical Services